1. <th id="fxglm"><video id="fxglm"></video></th><nav id="fxglm"></nav>

      1. <th id="fxglm"><sup id="fxglm"></sup></th>
      2. <dfn id="fxglm"><li id="fxglm"></li></dfn>

        <tr id="fxglm"></tr>

        <strike id="fxglm"></strike>

          <th id="fxglm"><video id="fxglm"></video></th>
          <th id="fxglm"><video id="fxglm"></video></th>
          CY SERIES
          UNIVERSAL LATHE
           
          Lathe Features
          High rigidity spindle system, with absolute temperature rising no higher than 35.
          The headstock, gear-box, apron and bed-ways are made of high quality cast iron, and are all cast with the resin sand foundry technology. The bed ways are induction-hardened, with hardness around HRC 55.
          The spindle supported by 3-pointed high-precision bearings and all gears in headstock are precisely grinded, the spindle turns smoothly at high speed.
          Rapid feed system to improve efficiency. Wide range of feed and pitch are available without changing gears.
          When rapid feeding is on, the tool slide longitudinal travel handwheel will be automatically disfunctioned.
          Reliable safety devices such as footbrake and emergency power-off switch are assembled. Adjustable overload protection device is also installed in the feed system.
          The tool post adopts the structure of ratchet pawl, and can be relocked by turning the lever for just half a lap.
          Tailstock are equipped with double-locked mechanism, smooth and effortless movement is ensured by the elastic scroll devices underneath.
          With capacity of swing over bed 660mm, swing in gap 830mm, distance between centers 1000 C 5000mm, this lathe covers wide range of working pieces.

          Standard accessories: Optional accessories:
          1. 3-jaw chuck
          2. Chip guard
          3. Foot brake
          4. Coolant system
          5. Illumination system
          6. Operation manual
          7. Full set of wrench and screw driver
          1. 4-jaw chuck
          2. Face plate
          3. Drive plate
          4. Steady rest
          5. Follow rest
          6. Thread chasing dial
          7. Live center
          8. Center
          9. Center sleeve
          10. Chuck cover
          11. Taper turning attachment(TTA)
          12. Micro stop for saddle
          13. 4-position stop for saddle
          14. 4-position stop for cross slide
          15. Quick change tool post
          16. Halogen work lamp
          17. Digital readout(DRO)
          18. Damping washer
          19. Foundation bolts
          20. CE standard compliance
           
          MAIN SPECIFICATIONS
           
           
           
          The explanation, diagram and technical parameter are varying with continuous technology development without further notice.

          Copyright(C) 2007-2015 CY Corporation.All Rights Reserved.
          Yunnan CY Group Co., Ltd
          在线日韩国产成人免费_中文字幕在线不卡日本v二区_中文欧美做真爱大免费_日本黄色二级片